Decimal Division — The Shifting Point
Aim
To explore division of decimals, first by 10, 100 and 1000 and then by whole numbers using the place-value (long division) method, and to discover when and why the decimal point is placed in the quotient.
Apparatus
- A length of ribbon, string or paper strip
- Ruler, scissors and pencil
- A place-value chart (Ones, Tenths, Hundredths, Thousandths) drawn on paper
- Counters, beads or bottle caps
Procedure
- Fold a 3.9-unit ribbon into 10 pieces and measure one (0.39). Imagine 100 pieces for 3.9 ÷ 100.
- Divide 18.7 and four more numbers by 10, 100, 1000 and 10000. Watch how the decimal point moves.
- Share 9.5 among 4 on the place-value chart. Regroup the leftover into the next place each time.
- Check 9.5 ÷ 4 with an equivalent fraction (multiply top and bottom by 25) and by multiplying back.
- Try a decimal divisor, 4.68 ÷ 1.3. Multiply both numbers by 10 to make the divisor whole, then divide.
- Write, in your own words, what you must do to the dividend when you make the divisor a whole number.

Interactive 3D Experiment
Loading simulation…
What to observe
- Dividing by 10, 100 and 1000 moves the decimal point 1, 2 and 3 places to the left; the digits stay.
- 9.5 ÷ 4 = 2.375. The point appears in the quotient when the ones are regrouped as tenths.
- The fraction method and the long division agree.
- To divide by a decimal, multiply the divisor and the dividend by the same power of 10.
Notes
- Dividing can make a number bigger! 128 ÷ 0.4 = 320, which is larger than 128. This happens when you divide by a number between 0 and 1.
- When you divide by 10, 100 or 1000, the digits stay put and the decimal point slides left, one place for every zero.
- Place the decimal point in the quotient directly above the decimal point in the dividend.
- Regroup one place at a time, ones into tenths, tenths into hundredths, without skipping a place.
- Add zeros to the right of the dividend as needed; this does not change its value.
- Measure and fold the ribbon accurately, since an unequal cut gives a wrong reading.
- Verify each answer by multiplying the quotient by the divisor.
- Use scissors carefully while cutting the ribbon or paper strip.